Individual Type VSB vents can be made to fit the available building apertures that achieve the required vent area for deflagration venting. Type VSB vents are available in sizes up to 56” x 120” (1.2m x 3m) and with set pressures as low as 4” Water Column / 0.14psi (10mBar).
Polycarbonate vent construction permits transmission of daylight while maintaining insulation properties similar to double pane glass (typical R value of 2.7) and an impact strength rating of over 200 times that of single pane glass.
An isolation System provides protection to interconnected equipment in the event of an explosion hazard.
An introduction to Industrial Explosion Protection and Prevention including information on venting, suppression, spark detection, isolation and testing.
The BS&B global team appreciate the support of our customers and suppliers during this challenging time.