Descriptive guide to BS&B products.
Imperial vs. metric units
This brochure provides the facts, advantages, applications and applicable portions of the ASME Code which governs this topic
Combination capacity factors of BS&B rupture disk (bursting disc)s (bursting discs) and various safety relief valves
Various special applications that deviate from standard practice to achieve greater flexibility in rupture disk application
Size, material and pressure ranges of tension loaded rupture disks (bursting discs)
Overpressure Protection for Steam Turbines and Condensers
Surge resistant rupture disks (bursting discs) for railroad tank cars
Composite and scored tension-loaded disks for low to medium rupture pressures in a low cost safety head
Quick replacement of actives disk fast and with minimum process line exposure to personnel and the environment.
Low cost unit for protection and isolation of atmospheric vessels, discharge manifolds, etc.
Specifically designed for protection of Intermodel Tank Containers
Atmospheric Vacuum Breaker (AVB™) rupture disk (bursting disc) provides protection against both positive and overpressure implosions under vacuum conditions
Offers two-way pressure relief for overpressure and implosion protection
MB™, IMB™, and IMBL™ type impregnated graphite disks offer low burst pressures and excellent corrosion resistance
MB+™, IMB+™, and IMBL+™ type impregnated graphite disks offer low burst pressures and excellent corrosion resistance
RE™, REL™ and REV™ type impregnated graphite disks offer low burst pressures and excellent corrosion resistance
S90™, JRS™, FRS™, RLS™ and SKR™ reverse buckling disks. SRB-7RS™, S90-7R™ and SRB-7FS™ Safety Heads.
The LPS™ rupture disk was developed to provide low burst pressures using reverse buckling technology.
The SKR™ is the first rupture disk (bursting disc) specifically developed and performance tested for use in all service conditions.
The SKR-U™ design allows for the SKR™ disk to be installed in a Threaded Union-Type Holder. Ideal for isolating small relief valves.
The S-90™ rupture disk welded into a flange used for safety relief valve isolation in fixed piping applications
A range of reverse buckling disks requiring knife blades for their operation
The CSI™ disk provides a one to one damage safety ratio in a pretorqued CSR-7RS™ safety head. May be used for liquid or gas service.
Rupture Disks (Bursting Discs) for the Highest Operating Pressure in Gas or Liquid Service.
A range of rupture disks (bursting discs) with integral gaskets offering the lowest burst pressures in a reverse buckling style disk
Innovative design using SAF™ technology (Structural Apex Forming)offering a wide range of burst pressures for sanitary/aseptic applications in the pharmaceutical, biotechnology and food industries.
Our comprehensive range of sanitary rupture disks (bursting discs) and holders for use in sanitary/aseptic applications in the pharmaceutical, biotechnology and food processing industries
The GCR-N'" and GCR-NS'" reverse buckling disks may be quickly and simply installed in a NovAseptic NA-connect® holder permitting flush mounting of the disk with the interior wall of the vessel allowing easy cleaning and sterilization.
The GLP-S'" low pressure sanitary reverse buckling disk is designed for installation into sanitary/aseptic piping using the LP-C" safety head. The GLP-S adds a new capability for the designer of pharmaceutical, biotechnology, food industry and other clean service pressure relief systems.
The SRD and SRD-L (for lower burst pressures) are precision circular-scored reverse buckling rupture disks that are suitable for gas and full liquid service
A reverse buckling style disk in small sizes and low pressures
Designed for variable back pressure
Rupture disk particularly suited for high pressure applications
Suited for applications in the aircraft, defense and OEM industries
Rupture disks and overpressure relief devices for OEM, Aerospace, Transportation and Energy
The BS&B Type IPD provides protection is process enclosures where dust suspended in air represents an explosion hazard.
An isolation System provides protection to interconnected equipment in the event of an explosion hazard.
An introduction to Industrial Explosion Protection and Prevention including information on venting, suppression, spark detection, isolation and testing.
The Buckling Pin Relief Valve offers quick and simple field reset without removal from the piping system.
Advanced technology – compact, lighter and higher flow capacity than a typical API Safety Relief Valve
The Buckling Pin Relief Valve (BPRV™) offers quick and simple field reset without removal from the piping system.
The model 3-5111 is an angular type safety relief valve at 90º between the inlet and outlet connections. It is supplied with threaded or flanged connections, full nozzle, direct action, spring loaded, with full lift and fast opening.
The Model 6400 is an angular type safety valve at 90º between the inlet and the outlet connections. It has flanged connections, a full nozzle, direct action and is spring loaded. There are three types: Conventional, Balanced (with bellows) and Balanced-Piston. All three are designed with specific trims to work with gases, steam and liquids.
A review of the Flame Arresters
End-of-Line (Emergency) Pressure Relief Vent/Valve
End-of-Line Vacuum Relief Vent/Valve
End-of-Line Pressure/Vacuum Relief Vent/Valve
End-of-Line Pressure/Vacuum Relief Vent/Valve with Integral Flame Arrester
End of line Flame Arrester
In-Line Deflagration Flame Arrester / In-Line Detonation Arrester
In-Line Deflagration Arrester / In-Line Detonation Arrester
End-of-Line Deflagration Flame Arrester
End-of-Line Breather Vent with Integrated Flame Arrester
Pressure and Vacuum Relief Valve
Pressure and Vacuum Relief Valve with pipe-away connection
Pressure and Vacuum Relief Valve with pipe-away connection, atmospheric deflagration-proof
Inline Deflagration Arrester
Vacuum Relief Valve
Emergency Pressure Relief Vent
In-Line Deflagration Arrester
A full range of safety head assemblies and accessories for use with solid metal and composite type rupture disks (bursting discs).
A rupture disk (bursting disc) holder specifically designed for systems involving high viscosity liquids.
The Sta-Kul™ sealed type safety head is a throwaway assembly. The screw-type safety head has a replaceable disk.
The SRI-7RS™ is a pre-torqued safety head designed for ease of handling and installation. The BS&B signature ‘bite-seal’ is present in all nominal sizes, optimizing leak tightness.
Detec-Saf™ alarm system provides immediate warning and specific location of disk rupture and centralized monitoring of all disk locations.
A range of sensors suitable for different rupture disk types used to provide immediate warning of a ruptured disk., #77-1003
A sensor used to provide an electrical signal and visual warning of a ruptured disk.
Hello World!
Types S-90™, JRS™, RLS™, FRS™, SRD™, SRD-L™, CCS™, CCS-L™, VSP-SH™ Rupture Disks in SRB-7RS™, SRB-7FS™ and S90-7R™ Safety Heads
Types Sigma EXL™, Sigma™, SKR™, and LPS™ Rupture Disks SRB-7RS™ and S90-7R™ Safety Heads
Inline Design Valve
Request a Quote
Find a Rep
Custom Engineered Solutions
The BS&B global team appreciate the support of our customers and suppliers during this challenging time.